Seismic joints

Seismic & watertight expansion joint for car parks and any other places with or without traffic of slow vehicles.

JDH 6.08

All aluminium seismic floor expansion joint for indoor and outdoor applications. The two top aluminium components slide one into the other, which takes up any movement due to expansion and contraction. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap up to 100 mm. Suitable for heavy traffic of fork-lift truck on pneumatic tyres, pallet trucks and intense traffic of light vehicles. Section length of 4 m. Nitrile vapour barrier. Aluminium side angle sections, pre-drilled. Floor-to-floor type, and floor-to-wall type with exposed skirting. Vapour membrane as option (for heights > 20 mm), which can be supplied as whole length to avoid joining on site. Surface finish: anti-slip ribbed (R) or plain (G). Special finish with anti-slip nitrile inserts on request (426/RS range). Special parts on demand (T, X, L...).

JDH 6.12

All-metal floor expansion joint specially designed to withstand heavy loads: load handling equipment, lorries... Suitable for indoor and outdoor applications. The central elements allow significant expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap up to 200 mm, with large amount of movements and heavy loads. Suitable for heavy traffic of fork-lift truck on solid tyres (Vulkollan), loads of up to 6 tonnes/axle on pneumatic tyres, lorries, pallet trucks and intense traffic of light vehicles. Section length of 3 m. Aluminium side angle sections, pre-drilled. Floor-to-floor and floor-to-wall types. Anti-slip ribbed surface. This product is supplied ready to install, with spacers that must be removed after installation on the floor.

JDH 6.14

All-metal floor expansion joint specially designed to withstand heavy loads: load handling equipment, lorries... Suitable for indoor and outdoor applications. The central elements allow significant expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap up to 200 mm, with large amount of movements and heavy loads. Suitable for heavy traffic of fork-lift truck on solid tyres (Vulkollan), loads of up to 6 tonnes/axle on pneumatic tyres, lorries, pallet trucks and intense traffic of light vehicles. Section length of 3 m. Aluminium side angle sections, pre-drilled. Floor-to-floor and floor-to-wall types. Anti-slip ribbed surface. This product is supplied ready to install, with spacers that must be removed after installation on the floor.

JDH 6.16

Seismic floor expansion joint for indoor and outdoor applications, comprising two side angle sections and a central element of thick section made of aluminium, able to take up significant expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap up to 250 mm. Suitable for intense traffic of light vehicles. Section length of 2 m. Aluminium side angle sections, pre-drilled. Floor-to-floor and floor-to-wall types. Anti-slip ribbed surface. This product is supplied ready to install, with spacers that must be removed after installation on the floor. Special parts on demand (T, X, L...).

JDH 6.18

All-aluminium seismic floor expansion joint for indoor and outdoor applications. The two aluminium inner components slide one into the other, which takes up any movement due to expansion and contraction. Upper components made of aluminium, with the option of a nitrile strip for levelling. Suitable for all types of finish: concrete, screed, tiling, etc For indoor and outdoor floor joints with a gap up to 340 mm. Suitable for intense traffic of pedestrians and light trolleys (airport, supermarkets...), as well as traffic of light vehicles. Section length of 4 m. Aluminium side angle sections, pre-drilled. Nitrile strip as option. Floor-to-floor type, and floor-to-wall type with exposed skirting (type A) and hidden skirting (type AV). Ribbed anti-slip surface. Nitrile strip for levelling as option. Special finish with anti-slip nitrile inserts on request. Special parts on demand (T, X, L...).

JDH 6.20

All-aluminium seismic floor expansion joint for indoor and outdoor applications. The two aluminium inner components slide one into the other, which takes up any movement due to expansion and contraction. Interchangeable upper components made of aluminium, with the option of a nitrile strip for levelling. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap up to 340 mm. Suitable for intense traffic of pedestrians and light trolleys (airport, supermarkets...), as well as traffic of light vehicles. Section length of 4 m. Aluminium side angle sections, pre-drilled. Nitrile strip as option. Floor-to-floor type, and floor-to-wall type with exposed skirting (type A) and hidden skirting (type AV). Ribbed anti-slip surface. Nitrile strip for levelling as option. Special finish with anti-slip nitrile inserts on request. Special parts on demand (T, X, L...).

JDH 6.22

Seismic expansion joint for wide seismic movements that comprises side angle sections and a central plate made of aluminium. It is able to take up large expansion and contraction movements, as well as vertical shearing movements, and is also suitable for all types of finish: concrete, screed, tiling, etc. The JDH 6.22 seismic expansion joint and fire stop expansion joint can be used for indoor and outdoor floor joints where a gap of up to 200 mm, with significant movement, is present. It is suitable for pedestrian and light trolley traffic. The JDH 6.22 seismic expansion joint comes in 3m section lengths, and features aluminium side angle sections and middle plate. VEDA’s JDH 6.22 range includes floor-to-floor (JDH 6.22) and floor-to-wall (JDH 6.22A) versions, with anti-slip ribbed surfaces. Optional waterproof membranes, with the potential to integrate a drainage system to recover liquid, are also available. Moreover, the JDH 6.22 seismic expansion joint range can be used in association with vertical joints that offer the same finish and movement range (type JDV 4.02 or other).

JDH 6.24

Seismic floor expansion joint for large movements, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap up to 200 mm (please enquire if more width is required), with large amount of movements. SVF joints are particularly suitable for harsh environments such as the seaside, kitchens, swimming pools, water parks and thalassotherapy spas. Suitable for non-intense traffic of light vehicles, pedestrians and light trolleys. Section length of 3 m. Stainless steel side angle sections and middle plate. Floor-to-floor JDH 6.24 type , and floor-to-wall JDH 6.24 A type Anti-slip ribbed stainless steel. Waterproof membrane as option, with possibility of integrating drainage system to recover the liquid. SVF joints can be matched to vertical joints in terms of finish and movement range (please enquire).

JDH 6.26

Seismic floor expansion joint for large movements, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. . Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap up to 200 mm (please enquire if more width is required), with large amount of movements. JDH 6.26 joints are particularly suitable for hospitals, schools, etc. Suitable for intense pedestrians and light trolleys traffic. Section length of 3 lm. Stainless steel side angle sections and middle plate. Floor-to-floor Series JDH 6.26 , and floor-to-wall Series JDH 6.26 A Anti-slip ribbed stainless steel. Waterproof membrane as option, with possibility of integrating drainage system to recover the liquid. JDH 6.24 joints can be matched to vertical joints in terms of finish and movement range (please enquire).

JDH 6.28

Seismic floor expansion joint, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of hard floors (tiles, stone, marble, etc.), but can also be used with flexible floors or carpet. For indoor and outdoor floor joints with a gap up to 200 mm, with large amount of movements. Suitable for traffic of pedestrians and light trolleys. Section length of 3 m. Aluminium side angle sections and stainless steel middle plate. Floor-to-floor type only. The central plate takes the mortar on which the floor covering in laid. Once the floor covering is laid, the joint is practically invisible; only two stainless steel sections remain exposed. Waterproof membrane as option, with possibility of integrating drainage system to recover the liquid. JDH 6.28 joints can be matched to vertical joints of similar finish and with the same movement range (please enquire).

JDH 6.29

Aluminium seismic floor expansion joint specially designed for tile or stone integration (max height : 20 mm). This profile is designed for extra wide gaps and is adapted to cope with large seismic movements up tp 100%

JDV 4.02

All-aluminium vertical expansion joint for façades, comprising pre-drilled aluminium side sections and an interchangeable section in the centre, able to take up large multidirectional movements. A waterproof membrane is available to ensure protection against the elements. Specially suitable for quality finish requirements and for wide joints with large seismic movements. For vertical joints in façades with a gap up to 200 mm (larger dimensions available on request). Section length of 3 lm. Aluminium side and central sections. Nitrile membrane. Flat (JDV 4.02) and corner (JDV 4.02 A) types. Anodised aluminium. Compatible with seismic floor joints JDH 6.22, JDH 6.24 and JDH 6.26.

JDV 4.06

Vertical expansion joint for wall, ceiling and facade for joint gaps up to 350 mm. This seismic expansion joint allows large multidirectional movements. Available in flat and angle versions.

JDV 4.10

All metal vertical seismic expansion joint for train stations, airports, shopping centre... This range is design with springs to allow seismic movements. Aluminium

JDV 4.12

All metal seismic expansion joint for ceilings. Flat and angle models are available.

JDV 4.14

Expansion joint for false ceilings, comprising aluminium side sections and an interchangeable insert in the centre, able to take up large multidirectional movements. Specially suitable for suspended ceilings. For joints in false ceilings or suspended ceilings with a gap up to 350 mm. Section length of 4 m. Aluminium side angle sections. Top quality flexible PVC insert(Vedaflex). Flat and corner (E). Black or gray insert. Other RAL colours available on request.