Floor expansion joints with flexible insert

VEDA France offers a full range of floor expansion joint products, all-metal or with flexible inserts, for both light use and heavy duty expansion joint applications. Our floor expansion joint systems come in various sizes to suit gaps from 50mm to 200mm. The heavy duty expansion joint systems in our range are suitable for installation in car parks and similar settings, and our floor expansion joint range also includes seismic and watertight floor expansion joint systems.

JDH 5.02

Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints. Suitable for light traffic, and also for traffic of light trucks on pneumatic tyres and non-intense traffic of light vehicles. Section length of 4 lm. Flexible nitrile insert, interchangeable. Aluminium side angle sections, pre-drilled. Floor-to-floor type, and floor-to-wall type with exposed skirting , hidden skirting and hidden and offset skirting . Black or gray inserts, plain (special hospital environment) or ribbed surface. The plain option reduces the movement range. Special plain surface inserts for flexible floor and carpet, with +3 mm projection or +5 mm projection. Special parts on demand (T, X, L...).

JDH 5.02 with caps

Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.

JDH 5.04

Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints. Suitable for medium heavy traffic, and also for traffic of fork-lift trucks on pneumatic tyres and intense traffic of light vehicles. Section length of 4 m. Flexible nitrile insert, interchangeable. Aluminium side angle sections, pre-drilled. Floor-to-floor type, and floor-to-wall type with exposed skirting and hidden skirting. Black or gray inserts, plain (special hospital environment) or ribbed surface. The plain option reduces the movement range. Special plain surface inserts for flexible floor and carpet, with +3 mm projection or +5 mm projection. Special parts on demand (T, X, L...).

JDH 5.06

Seismic floor expansion joint, comprising aluminium side angle sections connected by an interchangeable flexible insert in the centre with plain surface, available in black or grey (other colours on request), able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints. Suitable for light traffic of pedestrians, and also for traffic of light trucks, and in the case of the type ref. JDH 5.06-100, for non-intense traffic of light vehicles. Section length of 4 m. Flexible nitrile insert, interchangeable. Aluminium side angle sections, pre-drilled. Floor-to-floor type, and floor-to-wall type with exposed skirting (type E) and hidden skirting (type EV). Black or gray plain surface inserts for easier maintenance (specially suitable for hospital environment). Special parts on demand (T, X, L...).

JDH 5.08

Floor expansion joint for indoor and outdoor applications, comprising two aluminium side angle sections and one or two interchangeable flexible EPDM inserts available in black or grey, able to take up expansion and contraction movements. An aluminium central support strengthens the system, allowing traffic of heavy loads.

JDH 5.10

Floor expansion joint for indoor and outdoor applications, comprising an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, marble, etc. For indoor and outdoor floor joints with a gap up to 30 mm. Suitable for pedestrians and non-intense traffic of light vehicles. Section length of 3 m. Brass side angle sections. Nitrile insert. Section length of 3 m. Brass side angle sections. Nitrile insert.

JDH 5.12

Floor expansion joint, comprising aluminium side angle sections connected by flexible inserts available in black or grey, able to take up expansion and contraction movements. Suitable for expansion joints with gaps up to 100 mm and for all types of finish: concrete, screed, tiling, etc. Suitable for intense traffic of light trolleys and vehicles. For indoor and outdoor floor joints with a gap up to 100 mm. Suitable for medium heavy traffic of fork-lift truck on pneumatic tyres and intense traffic of light vehicles. Section length of 4 m. Nitrile insert. Aluminium side angle sections, pre-drilled. Floor-to-floor type, and floor-to-wall type with exposed skirting. Black or gray insert. Special parts on demand (T, X, L...).

JDH 5.18

Seismic floor expansion joint, extra large, comprising two identical sections, generally from the JDH 5.02 or JDH 5.04 (see data sheets), connected by an aluminium supporting structure. The inserts are available in black or gray and in different widths (50 mm, 65 mm and 100 mm), able to take up relatively significant tridimensional movements. The extra large 992 range is suitable for gaps up to 600 mm and for all types of finish: slabs, screed, tiling, stone, marble, carpet, etc. For indoor and outdoor floor joints with a gap up to 600 mm. Suitable for intense traffic of pedestrians and light trolleys (airport, supermarkets...), and in the case the JDH 5.04, suitable also for intense traffic of light vehicles. Section length of 3 or 4 lm. Nitrile inserts. Aluminium side angle sections, pre-drilled. Galvanised middle plate in different thicknesses according to the load and width of the expansion joint. Floor-to-floor type, and floor-to-wall type with exposed skirting. Black or gray inserts, plain (special hospital environment) or ribbed surface. The plain option reduces the movement range. Special plain surface inserts for flexible floor and carpet, with +3 mm projection or +5 mm projection. Stainless steel or brass side caps available for a special finish.

JDH 5.20

Seismic floor expansion joint, extra large, comprising aluminium side angle sections and an aluminium central plate, connected by two flexible inserts, available in black, able to take up expansion and contraction movements. Suitable for expansion joints with gaps up to 400 mm and for all types of finish: concrete, screed, tiling, etc. This joint can be supplied with +3 mm inserts for installation with flexible floors. For indoor and outdoor floor joints. Suitable for traffic of pedestrians as well as light trolleys. Section length of 2 m. PVC insert, roll length of 30 m. Aluminium side angle sections, pre-drilled. Floor-to-floor and floor-to-wall types. Black insert.

JDH 5.25

Watertight floor expansion joint specially recommended for carparks. Stainless steel or aluminium protection, very good protection, very good resistance to intensive light vehicles traffic. Very resistant to chemicals and petrol. Specially designed for multistorey and underground exterior and interior carparks, ramps, podium, pedestrian bridges, etc. Weldable insert. Available with short or long wings.

JDH 5.26

Surface mounted floor expansion joint profile for interior or exterior. Made of drilled and coutersunk reinforced aluminium side plates associated with a hot weldable flexible insert. Specially adapted for installation on finished floor.

JDH 5.26 R+3

Surface mounted floor expansion joint profile for interior or exterior. Made of drilled and coutersunk reinforced aluminium side plates associated with a hot weldable flexible insert. Specially adapted for resilient flooring or resin finishes.

JDH 5.30

Waterproof floor expansion joint for car parks, access ramps, esplanades and any other applications without traffic or with traffic of low speed vehicles. It comprises a waterproof interchangeable flexible section able to take up expansion and contraction movements. The 910/PR joint is held by two galvanised steel or stainless steel strips available in different thicknesses. For indoor and outdoor floor joints with a gap between 15 mm and 35 mm. Suitable for medium heavy traffic of heavy vehicles on pneumatic tyres and intense traffic of light vehicles. Pre-drilled side strips, 3 m length, galvanised steel or stainless steel. Nitrile insert, roll length of 21 m. Floor-to-floor type, can also be installed as floor-to-wall type with exposed skirting. Black or gray insert welded using a hot knife to ensure the integrity of the joint. Galvanised steel or stainless steel side strips according to requirements.

JDH 5.31

Waterproof floor expansion joint for car parks, access ramps, esplanades and any other applications without traffic or with traffic of low speed vehicles. It comprises a waterproof interchangeable flexible section able to take up expansion and contraction movements. The JDH 5.31 joint is held by two galvanised steel or stainless steel strips available in different thicknesses. For indoor and outdoor floor joints with a gap between 35 mm and 50 mm. Pre-drilled side strips, 3 m length, galvanised steel or stainless steel. Nitrile insert, roll length of 18 m. Floor-to-floor type, can also be installed as floor-to-wall type with exposed skirting. Black or gray insert welded using a hot knife to ensure the integrity of the joint. Galvanised steel or stainless steel side strips according to requirements.

JDH 5.32

Waterproof floor expansion joint for car parks, access ramps, esplanades and any other applications without traffic or with traffic of low speed vehicles. It comprises an interchangeable flexible section able to take up expansion and contraction movements, held by two mill finish aluminium or galvanised steel or stainless steel strips available in different sizes. For indoor and outdoor floor joints with a gap between 40 mm and 70 mm. Suitable for medium heavy traffic of heavy vehicles on pneumatic tyres and intense traffic of light vehicles. Pre-drilled side strips, 3 m length, galvanised steel or stainless steel. Nitrile insert, roll length of 16 m. Floor-to-floor type, and floor-to-wall type with exposed skirting (type E). Black insert. Galvanised steel or stainless steel side strips according to requirements. Insert welded using a hot knife to ensure the integrity of the joint. Special parts on demand (T, X, L...).

JDH 5.34

Mechanical floor expansion joint made of aluminium side plates and flexible insert for all types of finishes : screed, natural stone, cast stone, etc.

JDH 5.35

Floor expansion joint for car parks and any other place with or without traffic of slow vehicles (max. 20km/h). Recommended in case of vertical differences up to 25 mm.