Joint covers & Compression profiles

The clips affixed, adhesive or folded building expansion joint covers are designed to protect and conceal the facade, wall, floor and ceiling expansion joints. Aesthetic, decorative and economic they are fast and easy to install. To cover your needs, we offer expansion joint covers for facade, expansion joint covers for wall, expansion joint covers for floor and expansion joint covers for ceilings for gaps from 10 to 500 mm. There are several cover joints according to the application : no traffic, light or medium traffic use adhesive or clips affixed joint covers; for intense traffic, use drilled and countersunk extruded joint covers. Aesthetic finishes are also available.
Flexible sealing profiles are designed to quickly, economically and aesthetically seal vertical and horizontal expansion joints, both external and internal. These profiles are the ideal solution for discreetly covering walls, facades and ceilings. For a perfect finish, the flexible profiles can be glued or embedded. They are compatible with all our firewall systems.

CJ Alu

Our aluminium joint covers are aesthetical, and easy to install, suitable for joints gaps from 10 mm to 150 mm. They are available from stock in 3m lengths in the following widths for flat sections: 50 mm, 60 mm, 70 mm, 90 mm, 120 mm, 140 mm, 180 mm, and 210 mm, and in these widths for angle sections: 50 mm, 60 mm, 70 mm, 90 mm and 120 mm.The Clip affixed aluminium joint covers are used in new constructions and in refurbishment projects, indoors or outdoors, in joints from 10-mm to 150-mm wide in walls, ceilings and floors (pedestrian use). They are installed easily by means of clips (clip sizes S, L, XL and XXL). They are fully compatible with our Vedafeu C fire barrier cords and beads, Vedafeu N blankets and Vedafeu M matresses. Made of 6063 T6 aluminium alloy, plain or with 15-micron anodised finish in clear colour. The number that follows indicates the width in millimetres of the joint cover. Aluminium joint covers can be supplied with powder coat finish in any RAL colour on demand; please enquire. All types can be supplied with plain finish or anodised finish, cut to length and/or drilled; for quantities and conditions, please enquire.

CJ Brass

Our brass joint covers are also available in different clip sizes for particular joint gaps, from 10 mm to 70 mm. These products are available from stock in 3m lengths, in flat section of 90 mm only. The Clip affixed brass joint covers are used in new constructions and in refurbishment projects, indoors or outdoors, in joints from 10-mm to 70-mm wide in walls, ceilings and floors (pedestrian use). They are installed easily by means of clips (clip sizes S, L, XL and XXL). They are fully compatible with our Vedafeu C fire barrier cords and beads. Made with extruded brass, we can also supply special sections on request. Brass joint covers are supplied in rough pressed finish.

CJ PVC

Our clip-on building expansion joint covers in PVC can be used either indoors or outdoors, for interior wall expansion joints, ceilings and floors (light use). They come in a variety of clip sizes to suit 10 mm to 120 mm joint gaps, and are available from stock in 3m lengths, in flat sections of 50 mm, 70 mm, 90 mm and 150 mm, and in angle sections of 50 mm, 70 mm and 90 mm. Clip-on PVC building expansion joint covers are used in new constructions and in refurbishment projects, for 10mm to 120mm interior wall expansion joints, as well as ceilings and low-traffic floors. They are installed easily by means of clips (sizes S, L, XL and XXL) and are fully compatible with our Vedafeu fire stop products. Flat covers for interior wall expansion joints, facades and ceilings have a W reference. Flat building expansion joint covers for floors have an LF reference for light duty floors, and an F reference for heavy duty floors with intense traffic of pedestrians and light trolleys up to 6kN. Angle building expansion joint covers have the same references preceded by the letter E, i.e. EW, ELF... The number that follows indicates the width in millimetres of the joint cover. Standard PVC building expansion joint covers are available in white (RAL 9016), beige (RAL 1015) and grey (RAL 7035). For other colours, please contact us.

CJ Stainless steel

The clip affixed stainless steel joint covers are designed to provide an attractive and decorative solution to the problem of protecting and concealing expansion joints (façades, walls and ceilings). Fast and easy to install: no drill or fixing required. They are suitable for use in new or refurbishment projects, inside or outside. They can be installed in any kind of building: shopping malls, office buildings, hospitals, etc. They resist to agressive environments (corrosion, salty air, high temperature, frost, etc.). To accomodate any of your needs, the following finishes are available: mill finish, brushed 220 grit, high gloss polished or leather-like stainless steel.

CJE-PF

CJE-PF range of joint covers is designed to protect and cover joints in the floor, but they can also be used in façades, walls and ceilings. Aesthetically pleasing, decorative and economical, they can be used indoors and outdoors. Pre-drilled and countersunk, easy to install, they are used in new constructions and in refurbishment projects, in joints from 10-mm to 250-mm wide. Available in flat sections of 90 mm, 120 mm, 140 mm, 180 mm, 210 mm, 320 mm and 400 mm, and in angle sections of 140 mm and 180 mm. They are generally used in new constructions and in refurbishment projects, indoors or outdoors, in floor joints from 10-mm to 250-mm wide. Fixed by mechanical means in one side, with suitable fasteners they can withstand non-intense traffic of light vehicles. They are fully compatible with our Vedafeu C fire barrier cords and beads. Made of 6063 T6 aluminium alloy CJE-PF joint covers are supplied with plain aluminium, but can also be supplied on request anodised or powder coated in any RAL colour.

CJP

The CJP range of folded joint covers is designed to protect and cover joints in façades, walls, ceilings and floors. Economical, easy and quick to install, pre-drilled or plain, they are used in new constructions and in refurbishment projects, in expansion joints up to 500-mm wide, using flat or angle sections. Generally installed by mechanical means, they are drilled and countersunk in one side every 400 mm, i.e. 7 holes per 3-m bar. Flat joint covers have a W reference, whilst angle joint covers have an EW reference; this is followed by a number that indicates the visible width in millimetres of the joint cover. They are used in floors, walls and ceilings, indoors or outdoors, in all types of constructions, such as shopping centres, airports, stations, office buildings, hospital, residential buildings, department stores, schools, supermarkets and hypermarkets, public council buildings, leisure centres, factories... They are fully compatible with our Vedafeu C fire barrier cords and beads. The CJP range is available in flat sections (W) and angle sections (EW), in different thicknesses. Standard thicknesses range from 1.5 mm to 3 mm. It is possible to supply on request folded sections of much greater thicknesses up to 20 mm. They are available in plain aluminium, anodised aluminium, powder-coated aluminium in any RAL colour, galvanised steel, 304 / 316 stainless steel and brass. It is possible to drill both sides, with round holes in one side and elongated holes in the other side in order to guide and keep as it moves with the expansion and contraction, or with elongated holes in both sides. A special foam with one adhesive side can be supplied as an option to ensure water and sound proofing (see our data sheet VEDALEN 111 G TWB B1).

CJ Alu

Our aluminium joint covers are aesthetical, and easy to install, suitable for joints gaps from 10 mm to 150 mm. They are available from stock in 3m lengths in the following widths for flat sections: 50 mm, 60 mm, 70 mm, 90 mm, 120 mm, 140 mm, 180 mm, and 210 mm, and in these widths for angle sections: 50 mm, 60 mm, 70 mm, 90 mm and 120 mm.The Clip affixed aluminium joint covers are used in new constructions and in refurbishment projects, indoors or outdoors, in joints from 10-mm to 150-mm wide in walls, ceilings and floors (pedestrian use). They are installed easily by means of clips (clip sizes S, L, XL and XXL). They are fully compatible with our Vedafeu C fire barrier cords and beads, Vedafeu N blankets and Vedafeu M matresses. Made of 6063 T6 aluminium alloy, plain or with 15-micron anodised finish in clear colour. The number that follows indicates the width in millimetres of the joint cover. Aluminium joint covers can be supplied with powder coat finish in any RAL colour on demand; please enquire. All types can be supplied with plain finish or anodised finish, cut to length and/or drilled; for quantities and conditions, please enquire.

CJ Brass

Our brass joint covers are also available in different clip sizes for particular joint gaps, from 10 mm to 70 mm. These products are available from stock in 3m lengths, in flat section of 90 mm only. The Clip affixed brass joint covers are used in new constructions and in refurbishment projects, indoors or outdoors, in joints from 10-mm to 70-mm wide in walls, ceilings and floors (pedestrian use). They are installed easily by means of clips (clip sizes S, L, XL and XXL). They are fully compatible with our Vedafeu C fire barrier cords and beads. Made with extruded brass, we can also supply special sections on request. Brass joint covers are supplied in rough pressed finish.

CJ PVC

Our clip-on building expansion joint covers in PVC can be used either indoors or outdoors, for interior wall expansion joints, ceilings and floors (light use). They come in a variety of clip sizes to suit 10 mm to 120 mm joint gaps, and are available from stock in 3m lengths, in flat sections of 50 mm, 70 mm, 90 mm and 150 mm, and in angle sections of 50 mm, 70 mm and 90 mm. Clip-on PVC building expansion joint covers are used in new constructions and in refurbishment projects, for 10mm to 120mm interior wall expansion joints, as well as ceilings and low-traffic floors. They are installed easily by means of clips (sizes S, L, XL and XXL) and are fully compatible with our Vedafeu fire stop products. Flat covers for interior wall expansion joints, facades and ceilings have a W reference. Flat building expansion joint covers for floors have an LF reference for light duty floors, and an F reference for heavy duty floors with intense traffic of pedestrians and light trolleys up to 6kN. Angle building expansion joint covers have the same references preceded by the letter E, i.e. EW, ELF... The number that follows indicates the width in millimetres of the joint cover. Standard PVC building expansion joint covers are available in white (RAL 9016), beige (RAL 1015) and grey (RAL 7035). For other colours, please contact us.

CJ Stainless steel

The clip affixed stainless steel joint covers are designed to provide an attractive and decorative solution to the problem of protecting and concealing expansion joints (façades, walls and ceilings). Fast and easy to install: no drill or fixing required. They are suitable for use in new or refurbishment projects, inside or outside. They can be installed in any kind of building: shopping malls, office buildings, hospitals, etc. They resist to agressive environments (corrosion, salty air, high temperature, frost, etc.). To accomodate any of your needs, the following finishes are available: mill finish, brushed 220 grit, high gloss polished or leather-like stainless steel.

CJE-PF

CJE-PF range of joint covers is designed to protect and cover joints in the floor, but they can also be used in façades, walls and ceilings. Aesthetically pleasing, decorative and economical, they can be used indoors and outdoors. Pre-drilled and countersunk, easy to install, they are used in new constructions and in refurbishment projects, in joints from 10-mm to 250-mm wide. Available in flat sections of 90 mm, 120 mm, 140 mm, 180 mm, 210 mm, 320 mm and 400 mm, and in angle sections of 140 mm and 180 mm. They are generally used in new constructions and in refurbishment projects, indoors or outdoors, in floor joints from 10-mm to 250-mm wide. Fixed by mechanical means in one side, with suitable fasteners they can withstand non-intense traffic of light vehicles. They are fully compatible with our Vedafeu C fire barrier cords and beads. Made of 6063 T6 aluminium alloy CJE-PF joint covers are supplied with plain aluminium, but can also be supplied on request anodised or powder coated in any RAL colour.

CJP

The CJP range of folded joint covers is designed to protect and cover joints in façades, walls, ceilings and floors. Economical, easy and quick to install, pre-drilled or plain, they are used in new constructions and in refurbishment projects, in expansion joints up to 500-mm wide, using flat or angle sections. Generally installed by mechanical means, they are drilled and countersunk in one side every 400 mm, i.e. 7 holes per 3-m bar. Flat joint covers have a W reference, whilst angle joint covers have an EW reference; this is followed by a number that indicates the visible width in millimetres of the joint cover. They are used in floors, walls and ceilings, indoors or outdoors, in all types of constructions, such as shopping centres, airports, stations, office buildings, hospital, residential buildings, department stores, schools, supermarkets and hypermarkets, public council buildings, leisure centres, factories... They are fully compatible with our Vedafeu C fire barrier cords and beads. The CJP range is available in flat sections (W) and angle sections (EW), in different thicknesses. Standard thicknesses range from 1.5 mm to 3 mm. It is possible to supply on request folded sections of much greater thicknesses up to 20 mm. They are available in plain aluminium, anodised aluminium, powder-coated aluminium in any RAL colour, galvanised steel, 304 / 316 stainless steel and brass. It is possible to drill both sides, with round holes in one side and elongated holes in the other side in order to guide and keep as it moves with the expansion and contraction, or with elongated holes in both sides. A special foam with one adhesive side can be supplied as an option to ensure water and sound proofing (see our data sheet VEDALEN 111 G TWB B1).

CP

Flexible expansion joints in EPDM or PVC to be installed on floor, sealed with a special glue. Internal cell’s design allows up to 50% multidirectional movements while maintaining sufficient lift to absorb the traffic. Hydrocarbon and UV resistant profiles, to be installed at least 5mm below the floor level.

PSO

Compression profile for joint gaps from 10 to 120 mm. Embedded or glue-down installation. Standard colours: black, grey, beige. It can also be supplied in all possible RAL colours. Depending on conditions of use such as resistance to oils and bitumen, large movements at extreme temperatures, fire resistance, physiologically safe, the PSO and PSR profiles can be manufactured from selected raw materials according to DIN 7865, ASTM D638 and ASTM D746. PSO and PSR compression profiles are manufactured according to the DIN 18541 standard : elongation at break >350%, excellent resistance to chemicals and to ageing, permanent elasticity equivalent to that of natural rubber. Black and Grey. Other colours available according to the RAL chart of colours or to match with specific sample. Please consult us.

PSR

Embedded flexible seals (they can be glued) for fast and cost-effective installation in vertical and horizontal joints, either indoors or outdoors. PSR seals have a cap-shaped top section that ensures a full covering of the joint, masking any possible irregularities in the joint. Depending on conditions of use such as resistance to oils and bitumen, large movements at extreme temperatures, fire resistance, physiological harmlessness, the PSO and PSR profiles can be manufactured from selected raw materials according to DIN 7865, ASTM D638 and ASTM D746. PSO and PSR compression profiles are manufactured according to the DIN 18541 standard : elongation at break >350%, excellent resistance to chemicals and to ageing, permanent elasticity equivalent to that of natural rubber. Black and Grey. Other colours available according to the RAL chart of colours or to match with specific sample. Please consult us.