Joint covers & Compression profiles

The clips affixed, adhesive or folded building expansion joint covers are designed to protect and conceal the facade, wall, floor and ceiling expansion joints. Aesthetic, decorative and economic they are fast and easy to install. To cover your needs, we offer expansion joint covers for facade, expansion joint covers for wall, expansion joint covers for floor and expansion joint covers for ceilings for gaps from 10 to 500 mm. There are several cover joints according to the application : no traffic, light or medium traffic use adhesive or clips affixed joint covers; for intense traffic, use drilled and countersunk extruded joint covers. Aesthetic finishes are also available.
Flexible sealing profiles are designed to quickly, economically and aesthetically seal vertical and horizontal expansion joints, both external and internal. These profiles are the ideal solution for discreetly covering walls, facades and ceilings. For a perfect finish, the flexible profiles can be glued or embedded. They are compatible with all our firewall systems.

CJ Alu

Our clip-affixed aluminium joint covers provide an aesthetical and decorative cost-effective solution. Our spring-clip system (available in different sizes: S, SLL, XL, XXL) allows an easy and fast installation. Our joint covers are suitable for joints gaps from 10 to 120 mm. They can be used for both new projects and refurbishment works, for indoor or outdoor configurations, for wall, ceiling and floor (pedestrian traffic only) joints.

CJ Brass

Our clip-affixed brass joint covers provide an aesthetical and decorative solution. Our joint covers are available in different clip sizes for particular joint gaps, from 10 mm to 60 mm. These products are available from stock in 3m lengths, in flat section of 90 mm only. The Clip affixed brass joint covers are used in new constructions and in refurbishment projects, indoors or outdoors, in joints from 10-mm to 60-mm wide in walls, ceilings and floors (pedestrian use).

CJ PVC

Our clip-on building expansion gaps covers in PVC can be used either indoors or outdoors wall expansion joints, ceilings and floors (light use). The expansion joint covers made for the floor are intended for a light use.

CJ Stainless steel

The clip affixed stainless steel joint covers are designed to provide an attractive and decorative solution to the problem of protecting and concealing expansion joints (façades, walls and ceilings). Fast and easy to install: no drill or fixing required.

CJE-PF

CJE-PF range of joint covers is designed to protect and cover joints in the floor, but they can also be used in façades, walls and ceilings. Aesthetically pleasing, decorative and economical, they can be used indoors and outdoors. Pre-drilled and countersunk, easy to install, they are used in new constructions and in refurbishment projects, in joints from 10-mm to 250-mm wide.

CJP

The CJP range of folded joint covers is designed to protect and cover joints in façades, walls, ceilings and floors. Economical, easy and quick to install, pre-drilled or plain, they are used in new constructions and in refurbishment projects, in expansion joints up to 500-mm wide, using flat or angle sections. Generally installed by mechanical means, they are drilled and countersunk in one side every 400 mm, i.e. 7 holes per 3-m bar.

CJ Alu

Our clip-affixed aluminium joint covers provide an aesthetical and decorative cost-effective solution. Our spring-clip system (available in different sizes: S, SLL, XL, XXL) allows an easy and fast installation. Our joint covers are suitable for joints gaps from 10 to 120 mm. They can be used for both new projects and refurbishment works, for indoor or outdoor configurations, for wall, ceiling and floor (pedestrian traffic only) joints.

CJ Brass

Our clip-affixed brass joint covers provide an aesthetical and decorative solution. Our joint covers are available in different clip sizes for particular joint gaps, from 10 mm to 60 mm. These products are available from stock in 3m lengths, in flat section of 90 mm only. The Clip affixed brass joint covers are used in new constructions and in refurbishment projects, indoors or outdoors, in joints from 10-mm to 60-mm wide in walls, ceilings and floors (pedestrian use).

CJ PVC

Our clip-on building expansion gaps covers in PVC can be used either indoors or outdoors wall expansion joints, ceilings and floors (light use). The expansion joint covers made for the floor are intended for a light use.

CJ Stainless steel

The clip affixed stainless steel joint covers are designed to provide an attractive and decorative solution to the problem of protecting and concealing expansion joints (façades, walls and ceilings). Fast and easy to install: no drill or fixing required.

CJE-PF

CJE-PF range of joint covers is designed to protect and cover joints in the floor, but they can also be used in façades, walls and ceilings. Aesthetically pleasing, decorative and economical, they can be used indoors and outdoors. Pre-drilled and countersunk, easy to install, they are used in new constructions and in refurbishment projects, in joints from 10-mm to 250-mm wide.

CJP

The CJP range of folded joint covers is designed to protect and cover joints in façades, walls, ceilings and floors. Economical, easy and quick to install, pre-drilled or plain, they are used in new constructions and in refurbishment projects, in expansion joints up to 500-mm wide, using flat or angle sections. Generally installed by mechanical means, they are drilled and countersunk in one side every 400 mm, i.e. 7 holes per 3-m bar.

CP

Flexible expansion joints in thermoplastic vulcanizate or EPDM to be installed on floor, sealed with a special glue. Internal cell’s design allows up to 50% multidirectional movements while maintaining sufficient lift to absorb the traffic. Hydrocarbon and UV resistant profiles, to be installed at least 5mm below the floor level.

PSO

Compression profile for joint gaps from 10 to 120 mm. Embedded or glue-down installation.
Standard colours: black, grey, beige. It can also be supplied in all possible RAL colours.

PSR

Embedded flexible seals (they can be glued) for fast and cost-effective installation in vertical and horizontal joints, either indoors or outdoors. PSR seals have a cap-shaped top section that ensures a full covering of the joint, masking any possible irregularities in the joint.

JOINT COVERS & COMPRESSION PROFILES

For large areas, expansion joints are essential to relieve pressure and reduce cracking or damage caused over time by movement or shrinkage.

These joints act as a free space in the floor, wall and ceiling, which can move freely to absorb movement and prevent the material from cracking.

Expansion joints are essential for floors, walls, ceilings and roofs in parking lots, shopping centers, hospitals, etc. These solutions improve the longevity of structures by reducing damage caused by structural settlement, movement generated by the external environment and earthquakes.

Expansion joints are closed with an expansion joint cover plate. Seismic joint covers must be suitable for the joint opening, expected movement, application (floor, wall, ceiling) and expected floor traffic.

Building expansion joint covers are therefore essential in large structures.

 

What Types Of Expansion Joint Covers Are Available?

There are many types of expansion joint cover plate on the market, and each has a specific function and style. To make sure you get the right joint cover, don’t hesitate to contact us.

We offer building expansion joint covers attached with clips, glue both flat and angled to meet all needs. So you can find the option you need in our wide range.

Our seismic joint covers are available in a range of colors and materials, so there is one for every project. Because the joint covers are visible, they must be both aesthetically pleasing and functional.

 

Choosing The Right Seismic Joint Covers

Building expansion joint covers are designed to protect and conceal the facade, wall, floor and ceiling expansion joints. Aesthetic, decorative and economical, they are easy to install.

To meet the needs of our clients, we offer expansion joint covers for facades, expansion joint covers for walls, expansion joint covers for floors and expansion joint covers for ceilings, all of which can fill gaps from 10 to 500mm.

 

There are several cover joints according to the application:

  • For areas without traffic or with light pedestrian traffic and little expansion movement, we recommend clip-on or glue-on covers;
  • For areas with light vehicle traffic and significant movement, we recommend our CJE-PF extruded, drilled and milled joint covers.

 

Aesthetic finishes for seismic joint covers are also available so that you can find the perfect one that is both functional and pleasing to the eye.

Vertical and horizontal expansion joint covers can be associated with a VED’EPDM waterproofing membrane or a firestop solution such as our VEDAFEU C firestop rope.
You can view our entire range of expansion joint covers: CJ Alu, CJ Brass, CJ PVC, CJ Stainless steel, CJE-PF, CJP, CP, PSO and PSR.

LEARN MORE