Products

JDH 6.36 Floor expansion joints all metal

MATERIAL

ALUMINIUM

 

COLOUR

NATURAL

 

VERSION

FLAT & ANGLE 

  • Movement
  • Load
  • Environment
  • Surface mounted floor expansion joint
  • For intensive traffic
  • For joint gaps from 50 to 135 mm

All aluminium floor expansion joint, surface-mounted, for indoor and outdoor applications. The two top aluminium components slide one into the other, which takes up any movement due to expansion and contraction. Suitable for all types of finish: concrete, screed, tiling, etc.

For indoor and outdoor floor joints with a gap of 50 mm, 70 mm or 100 mm. Installation on finished floors. Suitable for heavy traffic of fork-lift trucks on pneumatic tyres, pallet trucks and intense traffic of light vehicles.

Section length of 4 lm. Nitrile vapour barrier. Aluminium side angle sections, not drilled.


Floor-to-floor type, and floor-to-wall type with exposed skirting (type A) and hidden skirting (type AV). Vapour membrane as option, which can be supplied as whole length to avoid joining on site. Surface finish: anti-slip ribbed (R) or plain (G). Special finish with anti-slip nitrile inserts on request. Drilled and countersunk available on request. Special parts on demand (T, X, L...).

Reference
JDH 6.36
Gap (mm)
W
Movements (mm)
Visible width (mm)
S
Total width (mm)
B
Height (mm)
H
Loads
6.36-050 50 6 / -6 175 175 43 Fork-lift trucks on solid tyres
6.36-075 75 +10 / -10 200 200 43 Fork-lift trucks on solid tyres
6.36-090 90 12.5 / -12.5 215 215 43 Fork-lift trucks on solid tyres
6.36-115 115 +20 / -20 240 240 43 Light vehicles
6.36-135 135 +30 / -30 260 260 43 Pedestrians
Reference
JDH 6.36
6.36-050
Gap (mm)
W
50
Movements (mm)
6 / -6
Visible width (mm)
S
175
Total width (mm)
B
175
Height (mm)
H
43
Loads
Fork-lift trucks on solid tyres
Reference
JDH 6.36
6.36-075
Gap (mm)
W
75
Movements (mm)
+10 / -10
Visible width (mm)
S
200
Total width (mm)
B
200
Height (mm)
H
43
Loads
Fork-lift trucks on solid tyres
Reference
JDH 6.36
6.36-090
Gap (mm)
W
90
Movements (mm)
12.5 / -12.5
Visible width (mm)
S
215
Total width (mm)
B
215
Height (mm)
H
43
Loads
Fork-lift trucks on solid tyres
Reference
JDH 6.36
6.36-115
Gap (mm)
W
115
Movements (mm)
+20 / -20
Visible width (mm)
S
240
Total width (mm)
B
240
Height (mm)
H
43
Loads
Light vehicles
Reference
JDH 6.36
6.36-135
Gap (mm)
W
135
Movements (mm)
+30 / -30
Visible width (mm)
S
260
Total width (mm)
B
260
Height (mm)
H
43
Loads
Pedestrians

The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200 mm.