Products

JDH 6.10 Floor expansion joints all metal

MATERIAL

ALUMINIUM

 

COLOUR

NATURAL

 

VERSION

FLAT & ANGLE 

  • Movement
  • Load
  • Environment
  • For intensive heavy-duty traffic
  • For joint gaps from 40 to 100 mm

All-aluminium seismic floor expansion joint for indoor and outdoor applications. The two aluminium upper components slide one into the other, which takes up any movement due to expansion and contraction. Interchangeable aluminium upper components (for heights H > 18.5 mm). Suitable for all types of finish: concrete, screed, tiling, etc.

For indoor and outdoor floor joints with a gap up to 100 mm. Suitable for heavy traffic of fork-lift truck on pneumatic tyres, lorries, pallet trucks and intense traffic of light vehicles.

Section length of 4 m. Nitrile vapour barrier. Aluminium side angle sections, pre-drilled.


Floor-to-floor type, and floor-to-wall type with exposed skirting and hidden skirting. Vapour membrane as option (for heights > 18.5 mm), which can be supplied as whole length to avoid joining on site. Surface finish: anti-slip ribbed (R) or plain (G). Special finish with anti-slip nitrile inserts on request (JDH 6.10/RS range). Special parts on demand (T, X, L...).

Reference
JDH 6.10
Gap (mm)
W
Movements (mm)
Visible width (mm)
S
Total width (mm)
B
Height (mm)
H
Loads
6.10-040 40 5 / -5 97 197 18,5 / 32 / 45,5 Fork-lift trucks on pneumatic tyres Heavy vehicles +
6.10-065 65 10 / -10 128 228 18,5 / 32 / 45,5 Fork-lift trucks on pneumatic tyres
6.10-100 100 15 / -15 165 265 18,5 / 32 / 45,5 Fork-lift trucks on pneumatic tyres
Reference
JDH 6.10
6.10-040
Gap (mm)
W
40
Movements (mm)
5 / -5
Visible width (mm)
S
97
Total width (mm)
B
197
Height (mm)
H
18,5 / 32 / 45,5
Loads
Fork-lift trucks on pneumatic tyres Heavy vehicles +
Reference
JDH 6.10
6.10-065
Gap (mm)
W
65
Movements (mm)
10 / -10
Visible width (mm)
S
128
Total width (mm)
B
228
Height (mm)
H
18,5 / 32 / 45,5
Loads
Fork-lift trucks on pneumatic tyres
Reference
JDH 6.10
6.10-100
Gap (mm)
W
100
Movements (mm)
15 / -15
Visible width (mm)
S
165
Total width (mm)
B
265
Height (mm)
H
18,5 / 32 / 45,5
Loads
Fork-lift trucks on pneumatic tyres

The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200 mm.