Products

JDH 6.26 Floor expansion joints all metal

MATERIAL

ALUMINIUM

 

COLOUR

NATURAL

 

VERSION

FLAT & ANGLE 

  • Movement
  • Load
  • Environment
  • Seismic expansion joint
  • Special flexible floors
  • For joint gaps from 50 to 200 mm

Seismic floor expansion joint for large movements, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. . Suitable for all types of finish: concrete, screed, tiling, etc.

For indoor and outdoor floor joints with a gap up to 200 mm (please enquire if more width is required), with large amount of movements. JDH 6.26 joints are particularly suitable for hospitals, schools, etc. Suitable for intense pedestrians and light trolleys traffic.

Section length of 3 lm. Stainless steel side angle sections and middle plate.

Floor-to-floor Series JDH 6.26 , and floor-to-wall Series JDH 6.26 A Anti-slip ribbed stainless steel. Waterproof membrane as option, with possibility of integrating drainage system to recover the liquid. JDH 6.24 joints can be matched to vertical joints in terms of finish and movement range (please enquire).

Reference
JDH 6.26		 Gap (mm)
W 		Movements (mm)
 Visible width (mm)
S 		Total width (mm)
B 		Height (mm)
H 		Loads
6.26-050 50 +30 / - 50 170 330 40 Pedestrians Stretchers and trolleys
6.26-100 100 +50 / - 50 220 380 40 Pedestrians Stretchers and trolleys
6.26-150 150 +80 / - 100 330 490 40 Pedestrians Stretchers and trolleys
6.26-200 200 +80 / - 100 330 490 40 Pedestrians Stretchers and trolleys
6.26-050 A 50 +40 / - 30 125 205 40 Pedestrians Stretchers and trolleys
6.26-100 A 100 +40 / - 30 175 255 40 Pedestrians Stretchers and trolleys
6.26-150 A 150 +55 / - 60 240 320 40 Pedestrians Stretchers and trolleys
6.26-200 A 200 +55 / - 80 265 345 40 Pedestrians Stretchers and trolleys
Reference
JDH 6.26 		6.26-050
Gap (mm)
W 		50
Movements (mm)
 +30 / - 50
Visible width (mm)
S 		170
Total width (mm)
B 		330
Height (mm)
H 		40
Loads
 Pedestrians Stretchers and trolleys
Reference
JDH 6.26 		6.26-100
Gap (mm)
W 		100
Movements (mm)
 +50 / - 50
Visible width (mm)
S 		220
Total width (mm)
B 		380
Height (mm)
H 		40
Loads
 Pedestrians Stretchers and trolleys
Reference
JDH 6.26 		6.26-150
Gap (mm)
W 		150
Movements (mm)
 +80 / - 100
Visible width (mm)
S 		330
Total width (mm)
B 		490
Height (mm)
H 		40
Loads
 Pedestrians Stretchers and trolleys
Reference
JDH 6.26 		6.26-200
Gap (mm)
W 		200
Movements (mm)
 +80 / - 100
Visible width (mm)
S 		330
Total width (mm)
B 		490
Height (mm)
H 		40
Loads
 Pedestrians Stretchers and trolleys
Reference
JDH 6.26 		6.26-050 A
Gap (mm)
W 		50
Movements (mm)
 +40 / - 30
Visible width (mm)
S 		125
Total width (mm)
B 		205
Height (mm)
H 		40
Loads
 Pedestrians Stretchers and trolleys
Reference
JDH 6.26 		6.26-100 A
Gap (mm)
W 		100
Movements (mm)
 +40 / - 30
Visible width (mm)
S 		175
Total width (mm)
B 		255
Height (mm)
H 		40
Loads
 Pedestrians Stretchers and trolleys
Reference
JDH 6.26 		6.26-150 A
Gap (mm)
W 		150
Movements (mm)
 +55 / - 60
Visible width (mm)
S 		240
Total width (mm)
B 		320
Height (mm)
H 		40
Loads
 Pedestrians Stretchers and trolleys
Reference
JDH 6.26 		6.26-200 A
Gap (mm)
W 		200
Movements (mm)
 +55 / - 80
Visible width (mm)
S 		265
Total width (mm)
B 		345
Height (mm)
H 		40
Loads
 Pedestrians Stretchers and trolleys

The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200x200 mm.