This range of joint covers is designed to provide an attractive and decorative economical solution to the problem of protecting
and concealing expansion joints in the structure of a building.
CJE-PF range of joint covers is designed to protect and cover joints in the floor, but they can also be used in façades, walls and ceilings. Aesthetically pleasing, decorative and economical, they can be used indoors and outdoors. Pre-drilled and countersunk, easy to install, they are used in new constructions and in refurbishment projects, in joints from 10-mm to 500-mm wide.
Available in flat sections of 90 mm, 120 mm, 140 mm, 180 mm, 210 mm and 320 mm, and in angle sections of 140 mm and 180 mm.
The CJP range of folded joint covers is designed to protect and cover joints in façades, walls, ceilings and floors. Economical, easy and quick to install, pre-drilled or plain, they are used in new constructions and in refurbishment projects, in expansion joints up to 500-mm wide, using flat or angle sections.
Generally installed by mechanical means, they are drilled and countersunk in one side every 400 mm, i.e. 7 holes per 3-m bar.
Flat joint covers have a W reference, whilst angle joint covers have an EW reference; this is followed by a number that indicates the visible width in millimetres of the joint cover.
© All rights reserved
GV2 - VEDA France - CS 63052 - 95972 ROISSY CDG CEDEX - FRANCE
Tel:+33 (0)18.104.22.168.80 | Fax:+33 (0)22.214.171.124.81 | Email : firstname.lastname@example.org