JF 2700 stainless steel

Description

The JF 2700 range of bay joints has been designed to prevent problems, such as cracking and tile lifting, that will always appear when the floor covering is laid on large surfaces without any joints.

Use

The joints of the Luxe JF 2700 range are used as bay joints with rigid floor covering such as marble, granite, natural stone, poured covering, etc. They provide a decorative and luxurious appearance to the floor. In general, bay joints are used to enclose areas between 25 m2 and 60 m2, with a maximum linear dimension between 5 m and 10 m. The joint must reach a minimum depth of 2/3 of the thickness of the floor covering and its substrate mortar, but preferably the total thickness (substrate mortar + covering)

Composing

It comprises two stainless steel side sections available in heights of 20, 30 or 40 mm and thicknesses of 3 or 5 mm, covered with an adhesive expanded rubber, and a coloured silicone joint. Length of 3 m.

Finishes and special pieces

The edges can be supplied with raw, satin or bright finish. The elastomer is available all the common colours of silicone.